Volvo Symptom D12D US02 Service Manual page 92

Table of Contents

Advertisement

Group 20
Step 4: Component and Function Checks
Action:
Check that there is no carbon monoxide in the fuel.
Check for air in the fuel system.
Check the fuel lines, seals, and connections. Check for leakage, damage, or restrictions.
Check that the fuel quality is within specifications.
Check that the fuel supply pressure is within the specification from idle speed through to
full engine speed.
Check that the wiring harness for the engine control unit, including the connectors and
terminal pins, is fault free and properly connected.
Check that parameters for engine shutdown, power take-off, and cruise control are
properly set.
Check that the engine ECU receives the correct signals from the flywheel and camshaft
sensors.
Check that the oil pressure for the rocker arm shaft is within specifications when VCB
is non-active.
Check for worn or damaged injectors.
Check that the coolant temperature sensor functions properly.
Check that the intake manifold pressure sensor functions properly.
Check that the parameters for engine shutdown, power take-off, and cruise control are
properly set.
Check the fuel pump seals, valves, and shaft/gears for damage or wear.
"Engine Speed Surges in Power Take-off or Cruise
Control" page 74
88
D
C2002641
Refer to:
Group 23: Carbon Monoxide (CO) in the fuel
system, check
Group 23: Air in the Fuel System, Checking
Group 23: Fuel lines, check
Group 23: Fuel Quality, Checking
"Supply Pressure, Fault Tracing"
B), Information type "Diagnostics", group 2309.
"Engine ECU, Fault Tracing"
Information type "Diagnostics", group 2841.
Group 30: Wiring harness and terminal pin,
checking
VCADS Pro: Parameters, checking
"Cam and Flywheel Signals, Fault Tracing"
(Checklist H), Information type "Diagnostics",
group 2846.
Group 25: Oil pressure in the rocker arm shaft,
checking
Group 23: Unit injector, checking
Group 28: Coolant temperature sensor, check
"Intake and Exhaust System, Fault
Tracing"
(Checklist A), Information type
"Diagnostics", group 2500.
VCADS Pro: Parameters, checking
"Supply Pressure, Fault Tracing"
B), Information type "Diagnostics", group 2309.
(Checklist
(Checklist M),
(Checklist

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Symptom d16d us04

Table of Contents