Replacing Hv Hrc Fuse-Links - Siemens 8DJH Series Installation And Operating Instructions Manual

Operation
Removing the HV HRC fuse
compartment cover
Detaching the gasket of
the fuse slide
120
19

Replacing HV HRC fuse-links

For data to usable HV HRC fuse-links, see Page 24, "HV HRC fuse assembly" and see
Page 53, "Transformer protection table: Recommendation for the allocation of HV HRC
fuse-links make SIBA and transformers".
The HV HRC fuse compartment cover can only be removed if the earthing switch is in
"EARTHED" position.
When the HV HRC fuse compartment cover is removed, the earthing switch is
interlocked in "EARTHED" position.
Isolate and earth the transformer feeder.
Push the handle of the fuse slide slightly upwards towards the stop in order to
detach the gasket and be able to pull the fuse slide out more easily.
Revision 03 * INSTALLATION AND OPERATING INSTRUCTIONS 8DJH * 500-8067.9