Table of Contents
Advertisement
The
(red dot) button allows you to
set a programme for recording at any
time. The programme to be recorded can
be selected in any of the EPG views,
provided the
(red dot) button appears
at the bottom of the screen display.
Programme appears in EPG:
Select the desired programme and press
the
(red dot) button. The following
display appears (see example screenshot
on the right):
Reminder function
See "Reminder function (switch over to
programme)" section in this section.
First you must use the
medium. If the USB storage medium has more than one partition, you can select the chosen one here.
Each partition is displayed an a separate USB storage medium. The following display appears (example):
Before
check that there is suffi cient
storage space on the selected
storage medium or partition
(see screenshot on the right)!
You should make about 8 GB
storage
for one hour's HD recording
(depending on the contents
of the images transmitted).
70
EPG (Electronic Programme Guide)
buttons in the "Target" line to select the connected USB storage
each
recording,
capacity
available
Advertisement
Table of Contents
