Table of Contents
Advertisement
On-screen displays On Screen Display
Selecting a TV programme by number entry
Example
Switching over to radio programme
Reception status - radio
You can select a different TV programme during a current TV programme by enter-
ing the programme location number.
Use the number buttons
cations.
You wish to select the TV channel "DSF". This programme is stored under the pro-
gramme location number 015. (The order of TV programmes is defined in the pro-
gramme memory and therefore only serves as an example here.)
To select this programme, press the numbers
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other programmes – i.e. also programmes with
three-digit programme location numbers. You do not have to enter leading zeros.
You can switch over from a TV programme to a radio programme.
R
Press the
button on the remote control for this purpose.
The receiver switches over to the programme location of the radio programmes last
set. You can return to the TV programme by pressing the same button or
corresponding display relating to the received programme, i.e. as when selecting
the TV programmes, appears on the screen. The LCD display shows a small "r"
together with the programme location number.
The screen will be blanked out after several seconds.
screen display shows you the selected channel together with the time, the pro-
gramme start and end times as well as the programme title in the information box
provided this data is transmitted together with the signal.
quency, the polarisation, the symbol rate and the scrambling. The right side shows
the programme number, the programme broadcaster and the type of reception sig-
nal (free-to-air/ scrambled). By pressing the
1
0
to
for the purpose of entering the programme lo-
1
After switching over the receiver, simply
press the
radio channels in their ascending or
descending order in the channel memory.
Every time you press the button, an on-
By pressing the
this information box permanently displayed
or switch it off by pressing the button once
again.
A further option of selecting a different
programme is to press the
radio programme list is now displayed. In
the left column it will provide information
relating to the received satellites, the
transponder and its transmission fre-
ou
5
and
one after the other. The
ou
buttons to select other
O
button, you can leave
i
button. The
buttons you jump to the next
T
. The
19
Advertisement
Table of Contents
