Reminder Function - Kathrein UFS 913si Operating Instructions Manual

Reminder function

If you want to be reminded that a
programme is about to start, you can
activate the reminder function for the
desired programme.
function is set up in exactly the same way
as programming a recording. The only
difference is that in the "Recording" line
the entry must be "Reminder (just switch
over)".

Use the buttons to switch to the
"Date" fi eld and use the
select the desired day.

Next use the
to the selection fi eld "Start" and use the

buttons or the number pad to
select the desired changeover time.
When all settings have been made, press

the button to save the reminder
settings.
The programme is
programme guide and in the timer list view
(see screenshot on the right) with a green
dot and the receiver will automatically
switch over to the preselected channel at
the start of the programme.
The reminder function will only work if the receiver is in operation! The receiver is
not started up automatically by the reminder function.
Electronic Programme Guide (EPG)
The reminder

buttons to
buttons to switch
marked in the
49