Additional Information (I Button); Reminder Function (Change Over To Programme) - Kathrein UFS 902 Operating Manual

Hdtv receiver for satellite reception

Hide thumbs Also See for UFS 902:

Table of Contents

EPG - ELECTRONIC PROGRAMME GUIDE

ADDITIONAL INFORMATION (i BUTTON)

The additional information can always be opened by pressing

the

button whenever the "i symbol" appears in front of

the programme name (see screenshot on the right). First

however the channel must be selected. The following display

appears (example):

The additional information available for a programme is displayed in its own window. By pressing

the

button, if available, you can open further additional information on the selected programme.

The

buttons enable you to display the additional information for the preceding or following

programmes in the order of the previously selected list (see header). This feature always assumes that

the data has been supplied by the channel provider.

Using the

(red dot) button you can copy the selected programme to the recording settings

(see "Recording" section).

Press the

or the

button to exit the additional information.

If you wish to be reminded at the start of a programme, you can activate the reminder function for the

desired programme. The reminder function is set up in exactly the same way as programming a recording.

The only difference is that in the "Target" line the entry must be "Reminder". Select the desired settings

for your reminder (see "Recording (timer)" for the setting options) and then conﬁ rm the setting of the

reminder function by pressing the

button. The programme is marked in the Programme Guide with

a green dot and the receiver will automatically switch over to the pre-selected channel at the start of the

programme.

Table of Contents