Tv Programme Selection By Number Entry; Switching Over To Radio Programme; Reception Status - Radio - Kathrein UFD 515 Operating Manual

Programme selection

TV programme selection by number entry

Example

Switching over to radio programme

Reception status - radio

20
You can select a different TV programme during a current TV programme by enter-
ing the programme location number.
Use the number buttons
cations.
You wish to select the TV programme "DSF". This programme is stored under the
programme location number 015. (The order of TV programmes is defined in the
programme memory and therefore only serves as an example here.)
To select this programme, press the numbers
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other programmes – i.e. also programmes with
three-digit programme location numbers. You do not have to enter leading zeros.
You can switch over from a TV programme to a radio programme.
R
Press the  b utton on the remote control for this purpose.
The receiver switches over to the programme location of the radio programmes last
set. You can return to the TV programme by pressing the same button or
corresponding display relating to the received programme, i.e. as when selecting
the TV programmes, appears on the screen. The LCD display shows a small "r"
together with the programme location number.
The screen will be blanked out after several seconds.
After the switch-over of the receiver, simply press the
other radio channels in their ascending or descending order in the channel mem-
ory.
together with the signal.
O
By pressing the  b utton, you can leave this information box permanently dis-
played or switch it off by pressing the button once again.
air/scrambled) is shown on the right.
1 0
t o f or the purpose of entering the programme lo-
1
Every time you press the button, an on-
screen display shows you the selected
programme together with the time, the
programme start and end times as well as
the programme title in the information box
provided these data are transmitted
A further option of selecting a different
programme is to press the
radio programme list is now displayed. In
the left column, it will provide information
relating to the received satellites, the
transponder and its transmission fre-
quency, the polarisation, the symbol rate
and the scrambling. The programme
number, the programme broadcaster and
the type of reception signal (free to-
5
 a nd  o ne after the other. The
ou
buttons to select
i
button. The
T
. The