Getting Started; Software Installation - Concord Camera 5345z User Manual

WARNING: MAKE SURE TO INSTALL THE SOFTWARE BEFORE
CONNECTING THE CAMERA FOR THE FIRST TIME TO THE
COMPUTER. FAILURE TO DO IT WILL PREVENT YOU FROM
RETRIEVING YOUR PICTURES FROM THE CAMERA.
Microsoft® Windows® Users:
1. Insert the CD into the CD-ROM Drive.
2. Open the icon My Computer by double clicking it, and then
double click the CD ROM drive icon.
3. Double click the folder "PC", then double click the
PC setup.exe icon as shown at the right:
4. Choose your preferred language, then press the
'Enter' button.
5. You have now entered the Welcome Page. Press the 'Next' button
to proceed.
6. Press 'Yes' button for the software license Agreement;
7. Press 'Next' button to set up software Destination location;
8. You have now entered the ArcSoft Program selection page. (The
ArcSoft Programs are only for photo editing). You will be given a
choice of installing the programs VideoImpression 1.6,
PhotoPrinter 2000 Pro and PhotoStudio 2000. Check all, some or
none, if you want to install all, some or none of the programs.
Note: While we do recommend that you use Arcsoft software,
choosing not to install these programs will not interfere with the
camera's operation, and this option is given to you if you already have
your favorite photo editing software installed on your computer. Press
'Next' to proceed.
9. Press 'Next' under the Select program software to proceed.
10. You now have come to the Camera Driver Installation Page.
Check the Camera Driver Button and Press the 'Finish' Button to
complete all installation procedures. You ARE REQUIRED to

GETTING STARTED

SOFTWARE INSTALLATION

7