Taking Pictures With The Lcd - Concord Camera 3.1 Megapixels Digital Camera User Manual

Flash Ready LED
A
Note: When the camera is capturing or storing a picture or video clip, do not power the camera off; otherwise,
the picture or video clip may become corrupted.
LIVE VIEW THROUGH THE LCD
AWB WB
fig. 1.1
1. Turn the camera on.
2. Set it to (
(If the LCD display is turned off, press the (
3. Aim the camera at the subject, then look at the LCD to frame the desired object(s) to be included in the
photo. (fig.1.1)
Note: For better results, stand at least 2 ft (0.6m) away from the subject in Normal Mode.
4. Press the Shutter button halfway down to activate the Auto-Focus function until the green AF LED stops
blinking and the AF frame on the LCD changes to green. (fig.1.2)
(The camera will automatically determine the best focus, and a rapid click can be heard.)
Note:
• For more information on Focus Lock, refer to p. 11.
• To change AF mode, refer to p. 24.
5. Hold the camera steady with both hands, then press and hold the Shutter button down fully to capture the
image. (fig.1.3)
• When the image is captured, a beep can be heard.
• After an image has been captured, the Flash Ready LED next to the Viewfinder will blink to indicate that
the image is being stored.
• A preview of the image will be displayed on the LCD for a second. To change the preview time, refer to p. 42.
• The picture counter number displayed in the LCD will be updated.
6. If you are not satisfied with the captured image, simply press (
A
more information, refer to p. 30.
Lit
The camera is
recording a video clip.
3
M
A 28/45
) Camera Mode.
A
AWB
A
AWB
4
M
28/45
A
fig. 1.2
AWB
2
) button repeatedly until the LCD display is on).
5
10
30
A
AWB
10
Blinking
The flash is recharging, or
LCD is in standby mode.
A
AWB
A
AWB
4
M
A 28/45
fig. 1.3
AWB
) button to delete it before it is saved. For
TAKING A PICTURE
A
AWB
A
AWB