Table of Contents
Advertisement
1. Identification decal
Installing the Right Fender
1.
Position a suitable floor jack under the rear
bumper tube and raise the rear tires off the
ground
(Figure
16).
Note:
Position the jack stands under the rear
bumper.
1. Rear bumper tube
2.
Remove the rear wheels.
3.
Remove all debris from the wheel-well area,
including any debris caught in the brake
assembly.
Figure 15
Figure 16
2. Floor jack
4.
Remove the bolt securing the hose clamp to the
frame channel on the right side of the machine
(Figure
17).
1. Hose clamp
5.
Insert the bottom of the hose clamp through the
slot in the top of the fender mount
g014980
1. Fender mount
6.
Loosely mount the hose clamp and fender mount
to the frame channel with the bolt previously
removed.
7.
Position the frame mount horizontally on the
frame channel.
g004863
8
Figure 17
2. Bolt
(Figure
Figure 18
g029559
18).
g029560
Advertisement
Table of Contents
