Table of Contents
Advertisement
Installing the Left Fender
1.
Disconnect the cable from the negative terminal
of the battery.
2.
Disconnect the cable from the positive terminal
of the battery.
3.
Remove the carriage bolt, washer, battery
hold-down, and nut securing the battery
23).
Note:
Retain the hold-down and the fasteners.
Figure 23
1. Battery hold-down
4.
Remove the battery from the battery tray
23).
5.
Remove the battery tray from the battery
platform
(Figure
Note:
Discard the battery tray.
2. Battery tray
23).
6.
Loosely mount the bracket on the top of the left
fender to the fuel-tank bracket with 2 bolts (3/8
x 3/4 inch) and 2 nuts (3/8 inch) as shown in
Figure
(Figure
1. Fuel-tank bracket
7.
Position the battery onto the battery platform.
8.
Loosely mount the battery to the battery platform
with the carriage bolt, hold-down, washer, and
nut that you previously removed
g029565
(Figure
9.
Tighten the fasteners.
10.
Connect the positive battery cable to the battery,
and then connect the negative battery cable to
the battery.
10
24.
Figure 24
2. Left fender
Figure 25
g029566
(Figure
25).
g029567
Advertisement
Table of Contents
