Table of Contents
Advertisement
Notes
Loading the dishwasher
Remove coarse food residues from crockery.
There is no need to pre-wash items under running water.
Risk of damage caused by acids and solvents.
Acid or solvent residues, especially hydrochloric acid or chlorides,
must not get inside the wash cabinet.
Do not put acids or solvents in the wash cabinet.
Damage caused by items soiled with ash, sand, wax, lubricant
or paint
These materials will cause damage to the dishwasher.
Do not wash items soiled with ash, sand, wax, lubricant or paint in
the dishwasher.
Load crockery and cutlery into the appropriate places in the baskets,
observing the following notes:
Load the crockery so that water can access all surfaces. This
ensures thorough and proper cleaning.
Load plates symmetrically in the upper and lower baskets with the
concave surfaces facing the centre of the basket (as shown on the
following pages).
Do not place crockery and cutlery inside other items. They will
cover one another.
Make sure that all items are securely positioned.
Hollow items such as cups, glasses, pans, etc. must be inverted in
the basket.
Tall, narrow, hollow items should be placed in the centre of the
basket if possible. This ensures better water coverage.
Wide-based items should ideally be placed at an angle so that
water can run off them freely.
The spray arms must not be blocked by items which are too tall or
hang through the baskets. If in doubt, test for free movement by
manually rotating the spray arms.
If you need to wash large load items in the lower basket, you can
remove the upper basket.
Small items can fall through the holders in the baskets. They should
therefore be placed in the cutlery basket.
Areas of application
35
Advertisement
Table of Contents
