Download Print this page

Advertisement

Quick Links

9889 Garrymore Ln
Missoula, MT 59808
888-687-3552 | +1-406-549-0769
www.aquacreek.com
Check entire box and all packing materials for parts. Before beginning assembly, read the
instructions and identify parts using the fi gures and parts listed in this document.
It is critical that all parts be carefully inspected prior to installation. If any damage occurred in
transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit.
Proper installation cannot be overstressed, as an improper installation voids Aqua Creek's
warranty and may affect the safety of the user.
Copyright © 2015 Aqua Creek Products All Rights Reserved
PART #: F-004PLB-AT1 (with anchor)
PART #: F-004PLBNA-AT1 (without anchor)
US PATENT NUMBER: [D507,769 S] [7,249,386 B2]
450 LB. [204 kg] MAXIMUM WEIGHT CAPACITY
LEAVE THIS MANUAL WITH LIFT OWNER
Lift safety can only be ensured if the lift is installed and
operated according to these instructions.
• NEVER permit children to play on or around the lift
• Do not allow children to use the lift without adult
superivsion
• NEVER apply direct water pressure to the electronics
• NEVER use the lift with a dry pool
ADA COMPLIANT
READ CAREFULLY
Pro Pool-AT
Pool Lift
MANDATORY
Read and follow all instructions.
1
Revised 12/2/15

Advertisement

loading
Need help?

Need help?

Do you have a question about the Pro Pool-AT and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Creek Products Pro Pool-AT

  • Page 1 It is critical that all parts be carefully inspected prior to installation. If any damage occurred in transit, Aqua Creek Products, LLC must be notifi ed within three days of receipt of unit. Proper installation cannot be overstressed, as an improper installation voids Aqua Creek’s warranty and may affect the safety of the user.
  • Page 2: Table Of Contents

    5. ANCHOR INSERT BAG - SET OF 4 (IF ORDERED WITH ANCHOR) 6. ANCHOR JIG PLATE (IF ORDERED WITH ANCHOR) 7. SAFETY BELT 8. HARDWARE BAG (IF ORDERED WITH ANCHOR) Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 3 THE MINIMUM 14.5" SETBACK. WHEN SETBACK 16" 19" THE CD-SPACE **14.5" STARTS 34" FROM THE POOL WALL. (SETBACK + 15") **NOTE: THE MAXIMUM POOL WALL SETBACK IS 19" FIGURE 1 Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 4: Anchor Installation: Core-Drill Retro-Fit

    You may need to saw cut a portion of your deck. See “Saw Cutting Retro-Fit Instructions” on page 6. Remove the nuts and the black protective coverings from the threaded anchor inserts. Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 5 Once the epoxy has set up, remove the hardware and the anchor jig plate. Your lift is now ready to be mounted to the anchoring system. The anchor jig plate may be recycled or used to install other anchors. Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 6: Anchor Installation: Saw-Cut Retro-Fit

    9. Pour concrete and fi nish the pool deck surface. SEE FIGURE A 10. Once the concrete has cured, the lift is ready to be mounted to the anchoring system. Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 7 SLAB (4" MIN EMBED) system. *SETBACK DIMENSIONS ARE FOR FLAT DECK APPLICATIONS. FOR SLOPED DECKS OR OTHER FEATURES, CONTACT AQUA CREEK BEFORE INSTALLATION. FIGURE C Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 8: Pro Pool-At Lift Assembly Instructions

    1/2" FLAT correctly mounted. WASHER (4) WHEN NOT IN USE, STORE THE POOL WALL BATTERY ON THE CHARGER! ANCHORS (4) INSTALLED FLUSH W/DECK SURFACE Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 9: Basic Troubleshooting

    Note: the lift will not retract if the battery is not fully charged or if the control box is not working. The emergency button only overrides the remote handset. Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 10: Proper Care Of Pool & Spa Lifts

    3M Scotch Brite™ pad. Use white epoxy paint to touch up the finish. Apply wax to protect when dry. For service and/or replacement parts contact Aqua Creek direct at Toll free: (888) 687-3552 Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 11 Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 12 FLAT WASHER, 5/16 SS 5/16” FLAT WASHER, SS NYLOCK, 5/16-18 SS 5/16”-18 NYLOCK NUT, SS HOSE CLAMP, 1 3/4. SS 1-3/4” HOSE CLAMP, SS FLAT WASHER, #10 #10 FLAT WASHER, SS Copyright © 2015 Aqua Creek Products All Rights Reserved Revised 12/2/15...
  • Page 13 (ITEM #’s F-004PLB-AT1, F-004PLBNA-AT1, F-004PLB-R-AT1, F-004PLB-DD12-AT1, F-004PLB-23-AT1, F-004PLB-26-AT1) Aqua Creek Products, LLC (a.k.a. Aqua Creek) also warrants to the original end user purchaser that products manufactured by Aqua Creek, when properly installed in accordance with assembly and installation instructions, and properly used and maintained, shall be free from...
  • Page 14 ACCESSORIES & OPTIONS COVERS F-019CA Cycle Attachment F-442BL-C Ranger/Pro Pool F-105LAR Pull-Out Legrest F-12BL-C Pro Pool XR/Patriot/ Portable Pro Pool F-422PLH Headrest (old Pro Pool) F-450BL-C Scout F-422PLH-2 Headrest (all other lifts) F-422XR Headrest F-720BL-C Revolution/Titan (Pro Pool-XR) F-423CS Chest Strap F-EZBL-C EZ/Power EZ F-414OHB...

This manual is also suitable for:

F-004plb-at1F-004plbna-at1