Error Message List - Oki ES6450 User Manual

Error message list

Clear the error by referring to the description of the corresponding message.
Meanings of symbols used in the error message are as follows.
 Color Name: One of the following: cyan (C), magenta (M), yellow (Y), black (K)
 Tray Name: One of the following: Tray 1, Tray 2, Tray 3, Tray 4 and MP tray
 Cover Name: Either the front cover or the top cover (Output tray)
 Code: The error code number of 1 to 3 digits. The displayed number changes with the specific error.
 Pages: Number of pages to print
 Media Size: The size of paper
 Media Type: The type of paper
 Number: Number of all places where paper jams have occurred
For "---", different messages are displayed depending on the state of this machine.
When "Please see HELP for details" is displayed at the bottom of the display, if you press «HELP» on the
operator panel, the error code and solution will be displayed.
Message
Cover Name Open
Please See HELP For Details
Belt Unit Is Not Installed Correctly.
Please Reset
Please See HELP For Details
Waste Toner Box Is Not Installed
Correctly Because The Cover Is
Open. Please Reset
Please See HELP For Details
Toner Cartridge Is Not Installed
Check All Toner Cartridges Are
Installed Correctly. Please See
HELP For Details
Color Name Image Drum Is Not
Installed Correctly. Please Reset
Please See HELP For Details
Fuser Unit Is Not Installed
Correctly. Please Reset
Please See HELP For Details
Fuser Unit Is Not Installed
Correctly. Reset Fuser Unit
Please See HELP For Details
Color Name Image Drum End Of
Life. Replace With A New Color
Name Image Drum
Please See HELP For Details
Error code
310, 311 The indicated cover is open. Close the cover.
310: Outlet tray (Top cover); 311: Front cover
330 The belt unit is not properly installed. Please reinstall the belt
unit.
To install the belt unit, see
331 The waste toner box is not properly installed. Please reinstall
the waste toner box.
To replace the waste toner box, see
toner cartridge and the waste toner
335 One of the four color toner cartridges is not properly installed.
Please reinstall the toner cartridge that is not properly installed.
To install the toner cartridge, see
cartridge and the waste toner
toner cartridge
340, 341, 342, 343 The image drum of the displayed color is not properly installed.
Please reinstall the image drum.
To install the image drum, see
drum(P.303)".
340: Yellow; 341: Magenta; 342: Cyan; 343: Black
320 The fuser unit is not properly installed. Please reinstall the fuser
unit.
To install the fuser unit, see
If the error persists, replace the fuser unit with a new one.
348 The fuser unit is not properly installed. Please reinstall the fuser
unit.
To install the fuser unit, see
If the error persists, replace the fuser unit with a new one.
350, 351, 352, 353 The image drum of the displayed color has reached the end of
its service life. You can continue printing for a while by opening
and closing the front cover, but please replace the image drum
with a new one promptly.
To replace the image drum, see
drum(P.303)".
350: Yellow; 351: Magenta; 352: Cyan; 353: Black
- 327 -
Description
"Replacing the belt
"Replacing the black(K)
box(P.298)".
"Replacing the black(K) toner
box(P.298)" or
(C/M/Y)(P.301)".
"Replacing the image
"Replacing the fuser
"Replacing the fuser
"Replacing the image
Troubleshooting
unit(P.308)".
"Replacing the
unit(P.310)".
unit(P.310)".