5
Adjust the manual feeder guide to the width of the paper to be loaded.
6
Shuffle the paper well. Align edges of the paper horizontally.
7
Load the paper with the print side facing up.
Do not exceed the ▽ mark on the paper guide when loading paper.
"Would you like to change the tray settings?" may appear on the display. This message will disappear
automatically after 10 seconds. If you have changed the paper, press «OK» and change the settings of paper
size, media type and media weight accordingly.
8
Move the paper placement cover downward.
The paper cannot be fed without lowering the paper placement cover.
If you always print on paper of the same size and type from the MP tray, register the loaded paper in this
machine.
Proceed to "
Setting paper information on the operator panel
Setting paper information on the operator panel
Set the size, type and weight of the paper loaded in each tray in order.
When envelopes are loaded, see "
When labels are loaded, see "
When long paper is loaded, see "
When irregular-sized paper is loaded, see "
Printing on envelopes
(P.145)".
Printing on labels
Printing on long paper
Printing on irregular-sized paper (custom size)
- 81 -
(P.81)".
(P.143)".
(P.147)".
Basic operations
(P.149)".