Table of Contents
Advertisement
Symptom
The memory is
The memory of this
insufficient.
machine is insufficient
as the print data is too
big.
All pages are not
The WSD port is used. Change the print destination port to the
printed.
Printing, printer search
The NBT/WINS
or setup is not
protocol is suppressed
available in the sleep
in the sleep mode.
mode.
Periodic email alerts
Periodic email alerts
are not notified in the
notification is
sleep mode.
suppressed in the
sleep mode.
The time and date
The time update
settings of this
function with the SNTP
machine may be
server is suppressed in
shifted if acquired from
the sleep mode.
the server.
Printing is slow.
Printing is also
performed on the PC
side.
In [Print Options] tab of
the printer driver,
[Extra Fine
(Multi-Tone)] or [Fine
(1200x1200dpi)] is
selected.
The print data is
complicated.
Narrow paper (less
than 182 mm) is used.
When moisture control
is set to [Mode1] or
[Mode2], it may take
more time to print and
output the first page.
Display of the printer
The printer driver may
driver is abnormal.
not work correctly.
The power turns off
If this machine has not
automatically.
been used for a certain
period of time (whose
factory default setting
is 4 hours), the power
will turn off
automatically. This
function is called Auto
Power Off.
The web page does
[Web] is set to
not open.
[Disable] in the menu
of this machine.
Cause
Print again after reducing the resolution in the
printer driver.
standard TCP/IP port.
Press the scroll buttons on the operator panel
to select [Specific] from [Admin Setup] - [USB
Setup] - [Connected Host].
Press the scroll buttons on the operator panel
to select [Specific] from [Admin Setup] - [USB
Setup] - [Connected Host].
Press the scroll buttons on the operator panel
to select [Specific] from [Admin Setup] - [USB
Setup] - [Connected Host].
Use a PC with a fast processing speed.
Select [Normal (600x600dpi)] in the
[Preferences] or [Print Options] tab of the
printer driver.
Select simple print data.
Press the scroll buttons on the operator panel
to select [Menus] - [Print Adjust] - [Narrow
Paper Speed], and change the setting.
Press the scroll buttons on the operator panel
to select [Off] in [Menus] - [Print Adjust] -
[Moisture Control].
Delete and reinstall the printer driver.
Press the scroll buttons on the operator panel
to select [Admin Setup] - [Power Setup] - [Auto
Power Off] - [Disable].
Press the scroll buttons on the operator panel
to select [Enable] in [Admin Setup] - [Network
Setup] - [General Setup] - [Web].
- 377 -
Solution
Troubleshooting
Reference
-
-
-
-
-
-
-
-
-
-
Deleting
software(P.322)
Installing
software(P.247)
Turning off the
power
automatically
(Auto Power
Off)(P.99)
-
Advertisement
Table of Contents
Troubleshooting
