Oki ES6450 User Manual page 114

Wired(LAN1)
Setup
System Power Save Time (Fn200)
Adjust
Sleep Time (Fn200)
Auto Power Off Time (Fn202)
Silent Mode
Clearable Warning
Auto Continue
Manual Timeout
Item
Network Factory Defaults
Wired(LAN1)
IP Address Set
IPv4 Address
Subnet Mask
Gateway Address
DHCPv6
HUB Link Setting
Changing settings from the operator panel
Factory
default
settings
Execute Restores network menu settings to factory
default settings.
Enable Enables/Disables the wired LAN1.
Auto Set to obtain the IPv4 address automatically
or input it manually.
xxx.xxx.xxx.x Input the IPv4 address manually. Displayed
xx when [IP Address Set] is set to [Manual].
xxx.xxx.xxx.x Input the subnet mask. Displayed when [IP
xx Address Set] is set to [Manual].
xxx.xxx.xxx.x Input the gateway address. Displayed when
xx [IP Address Set] is set to [Manual].
Disable Set to obtain the IPv6 address automatically.
Set to [Disable] when you do not use the
IPv6 address.
Auto Sets the connection method to the hub.
Negotiate
1minute Sets the time that will elapse before the
power save mode is entered.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, 60 minutes
15minute Sets the time that will elapse before the
sleep mode is switched from the power save
mode.
Value range: 1 minute, 2 minutes, 3 minutes,
4 minutes, 5 minutes, 10 minutes, 15
minutes, 30 minutes, 60 minutes
4hours Sets the time that will elapse before the
power is turned off automatically after the
standby mode is entered.
Value range: 1 hour, 2 hours, 3 hours, 4
hours, 8 hours, 12 hours, 18 hours, 24 hours
On Specifies the printing preparations when the
standby mode is switched from the sleep
mode.
[On]: Silent due to no preparation for
printing.
[Off]: The image drum makes a noise as it
prepares for printing, facilitating a faster
speed for the first printing start time.
ONLINE Sets the timing to clear the recoverable error
display.
Off Sets whether or not to automatically restore
this machine when a memory overflow or
tray request occurs.
60seconds Sets the waiting time for loading the paper
when you print with [Feed paper individually]
checked in the printer driver.
Value range: Off, 30 seconds, 60 seconds
- 114 -
Description