Mount The Fiber Cap M2; General Mounting Cautions - CommScope ERA CAP M2 Manual

M
OUNT THE
A Fiber CAP M2 is suitable for indoor and outdoor installations.
Mounting instructions are divided into the sections listed below. Follow the mounting instructions that are
applicable to this installation:
"Wall Mount a CAP M2" on page 18
"Mounting Orientation for Wall Mounts" on page 18
•
"Mounting CAP M2 with a Wall Mounting Kit" on page 19
–
"Mounting a CAP M2 with a Hybrid Fiber Splice Box Kit (optional)" on page 22
–
–

General Mounting Cautions

The following cautions apply to all Fiber CAP M2 installations; there may be other mounting cautions
applicable to a specific mounting option, which will be defined in the applicable mounting procedure.
Attach all CAP M2 securely to a stationary object as described in this installation guide.
To maintain proper ventilation, keep at least 76 mm (3-inch) clearance around the CAP M2.
The installation site must be able to bear the weight of the CAP M2; see
M0203AHA_uc
© August 2022 CommScope, Inc.
F CAP M2
IBER

Mount the Fiber CAP M2

Table 10 on page 16.
CommScope ERA ® CAP M2 with Fiber Interface
Page 17