Kogan Z11 PRO User Manual page 14

Replacing/cleaning HEPA filter
• Separate the dust cup from the machine body (refer to previous page).
• Remove the HEPA filter element from the top of the dust cup and clean it with a soft
brush.
• The HEPA filter and dust cup can also be cleaned using warm water. Before next use,
ensure the dust cup and HEPA filter are completely dry.
• If the HEPA filter is damaged or worn it must be replaced with a new filter.
Note: Do not use the vacuum filters without a HEPA filter installed in the correct position.
Notes:
• To maintain proper suction and operation, ensure the HEPA filter is cleaned
frequently.
• HEPA filters should be replaced every 6 months.
Cleaning machine body
• Never immerse the machine body in water or any liquid.
• Only use a soft, slightly damp cloth to clean the machine body. Do not allow any liquid
substances to enter the machine body.
• Do not use any corrosive chemicals or abrasives cleaners.