• Always hold by the power plug when connecting and disconnecting to avoid damaging the cord. Battery safety: • Only use the original battery supplied by Kogan.com. Do not use any other model or capacity of the battery. • Do not burn or expose the battery for to high temperatures.
Page 4
• Do not use the vacuum cleaner as a toy. Children nearby must be supervised. • Be careful when cleaning stairs. • Only use accessories included with this product and recommended by Kogan. • This vacuum cleaner is not suitable for cleaning water or other liquids. Do not vacuum water or wet debris.
Page 5
• To prevent personal injury and avoid irreparable damage, do not modify this product in any way • Only use replacement parts or spare parts provided by Kogan. WARNING: • Do not use water, solvents or polishing agents to clean the surface of the appliance.
ASSEMBLY Align the floor brush to the aluminium tube and push it gently. It will connect with an audible click. Align the aluminium tube with the vacuum cleaner body and push it gently. It will connect with an audible click. The floor brush and other brush heads can be connected directly to the vacuum cleaner body when a more compact unit is desired (for example, cleaning a car interior).
Page 10
Dust Cup Installation and Removal Rotate the dust cup anticlockwise and pull it backward to remove. To reinstall the dust cup rotate it clockwise Roller Brush Replacement • Push the ON/OFF switch towards the wheels and open the roller brush cover and lift the roller brush out.
Page 11
Wall Bracket Select a location that is easily accessible and has enough room for the vacuum to be mounted vertically. Ensure that the mounting location is close to an electrical outlet so that you can plug in the vacuum charger. Using the wall bracket as a template, mark the location of the hole that will need to be drilled.
OPERATION Turning the vacuum On/Off Once assembly is complete, press the power button at the handle to turn on the vacuum. Pressing the power button a second time will turn the vacuum off. Power button Suction adjustment Suction power can be set to three levels (low, medium & high) by pressing the suction adjustment button on the top of the machine body.
Page 13
Aluminium tube Easy to install, used for cleaning high places such as ceilings, roofs, air conditioners and curtains. Compatible with the included brush heads. Suction Head The suction head can be inserted directly into the machine body or connected to the aluminium tube.
Page 14
Long crevice nozzle This is suitable for cleaning various crevices and narrow areas in the household and the car. Charging When the battery level indicator displays “5”, the battery is low and will need to be charged. If the battery is not charged, eventually the light ring will flash red 8 times and the vacuum will turn off.
Page 15
Battery replacement To replace the battery, press the battery release button and pull the battery away from the machine body. Attach the replacement battery to the machine body, the battery will “click” into place when it is correctly installed. battery release button "click"...
CLEANING & CARE During operation • Do not let the unit get close to heaters or any other sources of heat (ovens, radiators etc.). • To prevent damage, before vacuuming, remove large and sharp objects from the area to be cleaned. Do not vacuum any inflammable objects or liquids, such as gasoline, cigarettes or alcohol.
Page 17
Cleaning the filters and dust cup After emptying the dust cup, rotate the dust cup counter-clockwise and pull it away from the machine body. Remove the HEPA filter from the top of the dust cup. Note: If the HEPA filter is damaged or worn, it must be replaced with a new filter.
Page 18
Wash the HEPA filters and the dust cup with water. Note: Do not wash the cyclone cone with water. Instead, gently tap it over a bin to remove any dust and debris. After washing, ensure the dust cup and HEPA filters are left to air dry for at least 24 hours before reassembly.
Page 19
Cleaning the mite removing head Use the cleaning brush, to clean the mite-removing brush. To remove the roller brush, place the switch into the unlock position and then remove the roller brush rod. Remove any hair, pet fur or other debris stuck to the roller brush before replacing it.
SPECIFICATIONS Battery capacity 2200mAh Battery voltage 29.6V Charging time 3~4H Adapter input 100-240V Adapter output 35V 0.8A Power wattage 500W TROUBLESHOOTING Issue Possible cause Solution • Check battery and replace if required Vacuum wont power on Battery depleted • Charge the battery •...
Page 21
Malfunction If a malfunction occurs, the display will let user know in one of the following ways: • If the light ring flashes red and the fan indicator illuminates, the fan is blocked. Empty the dust cup and clear out any blockages. •...
Page 24
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...