Lexmark MS531 User Manual page 73

Use printer menus
Menu item
Job Hold Timeout
0–255 (30*)
Download Target
RAM*
Disk
Resource Save
Off*
On
Print All Order
Alphabetical*
Newest First
Oldest First
Note: An asterisk (*) next to a value indicates the factory default setting.
Quality
Menu item
Print Resolution
600 dpi
1200 Image Q*
2400 Image Q
1200 dpi
300 dpi
Pixel Boost
Off*
Fonts*
Horizontally
Vertically
Both directions
Toner Darkness
1 to 10 (8*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the time in seconds that the printer waits for user intervention before
it holds jobs that require unavailable resources.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Specify where to save all permanent resources that have been
downloaded to the printer.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Determine what the printer does with downloaded resources when it
receives a job that requires more than the available memory.
Notes:
•
When set to Off, the printer retains downloaded resources only until
memory is needed. Resources associated with the inactive printer
language are deleted.
•
When set to On, the printer preserves all the permanent
downloaded resources across all language switches. When
necessary, the printer shows memory full messages instead of
deleting permanent resources.
Specify the order when you choose to print all held and confidential jobs.
Description
Set the resolution for the printed output.
Enable more pixels to print in clusters for clarity, to enhance images horizontally
or vertically or to enhance fonts.
Determine the lightness or darkness of text images.
73