Table of Contents
Advertisement
Further settings
Filter programme lock
The filter combination in the wash cabinet
filters coarse dirt particles out of the wash
water. If dirt particles enter the circulation
system, they may clog the spray arms,
valves, etc.
It is possible to stop the programme from
starting if the micro-fine filter has been
inserted incorrectly or is missing.
The menu is saved under the following input
path.
Extended settings
Programme lock filter
Programme lock filter
On
Off
On
-
Programmes are prevented from starting if
the micro-fine filter has been inserted
incorrectly or is missing.
A programme can only be started when
the micro-fine filter is inserted correctly.
Off
-
Programmes can be started regardless of
the status of the micro-fine filter. A
confirmation prompt is displayed, which
must be confirmed if the micro-fine filter is
not inserted correctly.
Select an option.
60
Standby/Off
If the dishwasher has not been used for
10 minutes, it can be set to standby or
switched off automatically.
In standby mode, the dishwasher remains
switched on and the Start/Stop button
flashes. The dishwasher can be reactivated
by pressing the Start/Stop button, touching
the display or opening the door.
After automatic switch-off, the dishwasher
is switched off and can be switched on
again by pressing the button.
The menu is saved under the following input
path.
Extended settings
08:15
Standby/Off
Standby after
10 min
Off after 10 min
Standby/Off
-
Switch to standby mode after 10 minutes
-
Off after 10 min
Switch off after 10 minutes.
Select an option.
Standby/Off
08:15
Advertisement
Table of Contents
