Table of Contents
Advertisement
Cleaning agent and rinsing agent
The level markers in the powder container
with the door in the horizontal position
indicate the fill level in millilitres (ml). The
max. capacity is approx. 60 ml of cleaning
agent.
The amount in ml equates to approx. the
amount normally recommended in grams (g)
for proprietary powder cleaning agents.
Powder density (grain size) can affect this
amount.
Dispensing example:
Approx. 8,5 litres of water are taken into
the machine for the main wash. With a
cleaning agent concentration of approx.
3 g/l, you will need approx. 25 g of
cleaning agent. Please observe
manufacturer's recommendations, which
may vary!
Add the cleaning agent to the dispenser.
Close the flap.
32
Make sure that all of the cleaning
agent has dissolved at the end of the
programme.
Repeat the programme if residual
cleaning agent is present.
Check whether any load items have
prevented the flushing out of the
dispenser container and rearrange the
load items if necessary.
Tips for the Super Short programme
Super Short
With the
on the model), the final rinse water is not
pumped away at the end of the programme
in order to achieve short programme
running times in continuous use.
Cleaning agent cannot be rinsed out of the
dispenser during the short programme time.
If liquid cleaning agent dispensing is not
being used, add powder cleaning agent
directly onto the inside of the door.
To avoid corrosion or discolouration, start
the wash programme immediately after
dispensing cleaning agent directly onto
the inside of the door.
programme (depending
Advertisement
Table of Contents
