Table of Contents
Advertisement
5. Spread the film by moving the applicator towards the
opposite end of the substrate at a constant speed.
6. Lift the applicator from the substrate taking care to catch any
product dripping from the applicator before it lands on the
newly prepared film.
3800/3805
1. Place a clean contrast sheet into the applicator and feed it
under the blade assembly.
2. Pour a quantitiy of product into each of the reservoirs of the applicator ensuring
the product is evenly distributed over the width of each reservoir.
3. Apply gentle downward pressure on the blade assembly and pull the contrast
sheet out of the instrument at a constant speed to spread the film strips.
4 CLEANING AFTER APPLICATION
Do not use very aggressive solvents or
wire brushes, metal scrapers, metal files or
other metallic tools for cleaning.
After cleaning, ensure that all materials are removed and that the instrument is dry. Use the case provided
to store the instrument when it is not being used.
6
Clean the applicator using a suitable
solvent.
Advertisement
Table of Contents
