Table of Contents
Advertisement
Thank you for your purchase of this Elcometer Film Applicator. Welcome to Elcometer.
Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings
and concrete. Our products cover all aspects of coating inspection, from development through application
to post application inspection.
This Elcometer Film Applicator is a world beating product. With the purchase of this product you now have
access to the worldwide service and support network of Elcometer. For more information visit our website
at www.elcometer.com
1 ABOUT THIS INSTRUMENT
The Elcometer Film Applicator is a simple but effective instrument for applying a uniform and reproducible
film of product to a flat and relatively firm substrate.
The applicator is set to the required gap and then placed on the substrate
substrate either in front of the blade, or into the reservoir of models which have this feature. The applicator
is then pushed across the substrate
1.1 STANDARDS
Depending upon model, Elcometer film applicators can be used in accordance with the following National
and International Standards: ASTM D 823, FTMS 141aM4121, FTMS 141a4122.1, FTMS 141a2161, FTMS
141a2162, FTMS 141a6226, FTMS 141a4121 and FTMS 141M6226.
a.
Elcometer 3800/3805 models are loaded with a contrast sheet. The contrast sheet is pulled out of the applicator by
hand to produce 2 or 3 strips of product on the sheet.
2
a
by hand or by a motorised film applicator to produce the film.
a
. Product is poured onto the
Advertisement
Table of Contents
