Selectronic SP PRO Instruction Manual page 3

OPERATION
Thank you for purchasing a Selectronic SP PRO series sine wave Interactive Inverter Charger.
Selectronic has an accredited Quality Assurance system to AS/ISO9001-2008 covering both
their manufacturing and design operations with over 25 years experience designing power
conversion equipment for both domestic and industrial purposes.
As a result Selectronic has had many opportunities to listen to both integrators and system
owners to determine their real needs.
We have learnt from our customers that:
• Modern systems need to do more than provide power and control a generator.
• Inverters should be flexible enough to "multi task" i.e. the same inverter should be able to
run a remote area home, be suitable for mobile applications and be able to support the
mains grid and export power to the mains grid when it is surplus to requirements.
• Complexity should be a matter of choice. The inverter should be able to perform with
the minimum of configuration but still be capable of integration into the most advanced
energy system.
• Battery longevity is paramount. A combination of battery protection and the best
charging parameters are essential.
• Monitoring / configuration software should be user friendly with intuitive "at a glance"
menu clarity.
The SP PRO has been designed with these, and many other criteria in mind.
In addition to power conversion the SP PRO can control, by time or power levels, water
pumping, equipment switching, scheduled events and even – with appropriate sensors –
determine if your soil in the garden is too dry and switch on a watering system. The possibilities
are endless; Your SP PRO is a complete Energy System.
The SP PRO is a remote area power supply in off grid areas, a mobile power supply in boats
and mobile homes and gird support in a solar hybrid system. All at the selection of one program
option.
Through a set of default parameters the SP PRO can simply be "hung on the wall" and work well
or have any of the many parameters individually adjusted.
Those same default parameters provide safe and efficient charging for most common batteries
along with provision to adjust for your individual battery pack.
SP LINK software program provided with the SP PRO has been designed with the user in
mind. No need to sift through menu chains – if you want to change a parameter relating to your
batteries click on "Battery". If you want generator control click on "Generator". Why was it ever
difficult?
If you have any comments about this document or your new SP PRO, please do not hesitate to
contact us via our web site www.selectronic.com.au.
We trust you will get many years of trouble free operation from your SP PRO.