Uplift Desk UDA116-SML Instructions

Package contents

Main unit
UPLIFT Desk • 1-800-349-3839 • info@upliftdesk.com • www.upliftdesk.com
®
XF Standing Desk Converter, Small, Instructions
UDA116-SML
Keyboard tray
Step 1
Unpack the box and verify the contents against the parts
above. Clear off the surface you intend to use the unit on,
and ensure there is at least 29''w by 26''d space for it.
Two people should lift the Main unit and place it on the
intended surface.
Step 2
Raise the Main unit to a higher position so that you can easily
access the space underneath. Grip the handle on the right
side, squeeze, and lift.
It is advised you hold onto it with two hands as you raise and
lower the worksurface.
Step 3
Unlatch the latches under your worksurface, and slide the
Keyboard tray into the slots underneath the Main unit's
worksurface. Once inside, flip the latches back up to secure
the Keyboard tray.
Step 4
You can now add your devices and work items to the unit.
Keep them centered and away from the edge of the main
worksurface, to prevent them from falling.
Do not place your monitors on the edge of the unit.
Velcro sheath Cable mounts
(qty 1) (qty 4)
UDA116-SML/R01