Manual Flash Setting On A Receiver Unit - Canon 0585C006 Instruction Manual

Manual Flash Setting on a Receiver Unit

You can directly operate the receiver unit to manually set the flash
output. This function is called individual receiver. This is convenient
when, for example, you use the Speedlite Transmitter ST-E2 (sold
separately) to perform wireless manual flash.
A receiver unit that is set as an individual receiver cannot receive flash
mode control from the sender unit. The unit is always fired at the manually
set flash output.
78
Set the individual receiver.
1
Press the <

cross keys.
Turn <9> to select <:

then press <8>.

<
on the LCD panel.

The flash mode is set to <q>.
Set the flash output.
2
Press the <O> button of the <S>

cross keys.
Turn <9> to set the flash output,

then press <8>.
I > button of the <S>
> appears
>,