Canon 0585C006 Instruction Manual page 51

Setting the Transmission Channel/Wireless Radio ID

Use the following procedure to set the transmission channels and
wireless radio IDs of the sender unit and receiver unit. Set the same
channel and ID for both the sender unit and receiver unit. Note that the
procedure is the same for the sender unit and receiver unit.
Transmission channel
Wireless radio ID
Set a channel.
1
Press <8>.

Turn <9> to select the channel

symbol, then press <8>.
Turn <9> to select <X> or any

channel between Ch. <Y> and
<\>, then press <8>.
Set a wireless radio ID.
2
Press <8>.

Turn <9> to select the ID symbol,

then press <8>.
Turn <9> to select the position

(digit) to be set, then press <8>.
Turn <9> to select a number from 0

to 9, then press <8>.
Set a 4-digit number with the same

procedure, and select <;>.
 When transmission between the
sender unit and receiver unit is
established, the <D> lamp is lit in
green.
Wireless Settings
51