A: Fully Automatic Flash Photography - Canon 0585C006 Instruction Manual

a: Fully Automatic Flash Photography

When you set the camera's shooting mode to <V> (Program AE) or fully
automatic mode, you can shoot in E-TTL II/E-TTL fully automatic flash
mode.
Effective flash range
If the subject is dark (underexposed) when you check the shot image,

move closer to the subject and shoot again. You can also increase the
ISO speed when using a digital camera.
"Fully automatic mode" refers to <A>, <1>, and <C> shooting

modes.
Even when attached to a camera that supports the E-TTL II autoflash

system, <a> is displayed on the LCD panel.
20
Set the flash mode to <a>.
1
Press the <E> button of the

<S> cross keys.
Turn <9> to select <Q>, then

press <8>.
Focus on the subject.
2
Press the shutter button halfway to

focus.

The shutter speed and aperture are
displayed in the viewfinder.
Check that <Q> is lit in the viewfinder.

Take the picture.
3
Check that the subject is in the

effective flash range.
When you press the shutter button

completely, the flash will fire and the
picture will be taken.