A Manual Flash Setting On A Receiver Unit - Canon Speedlite 470EX-AI Instruction Manual

A Manual Flash Setting on a Receiver Unit

You can directly operate the receiver unit to manually set the manual
flash. This function is called individual receiver. This is useful when, for
example, you use the Speedlite Transmitter ST-E2 (sold separately) to
perform wireless manual flash.
A receiver unit that is set as an individual receiver cannot receive flash
mode control from the sender unit. The receiver unit always fires at the set
flash output.
Set the individual receiver.
1
Press the <I> button of the <S>
cross keys.
Turn <9> to select <:A>,
then press <8>.
<(> appears on
the LCD panel.
The flash mode is set to <q>.
Set the flash output.
2
Press the <O> button of the <S>
cross keys.
Turn <9> to set the flash output,
then press <8>.
79