Wireless Settings - Canon 0585C006 Instruction Manual

Wireless Settings

To perform radio transmission wireless shooting, set the sender unit
and receiver unit with the following procedure.
Sender Unit Setting
Receiver Unit Setting
To perform normal flash shooting, select <F> to clear the wireless
(sender/receiver) settings.
Transmission Channel/Wireless Radio ID Settings
To avoid interference with wireless flash systems using radio
transmission used by other photographers or with other devices using
radio waves (wireless), you can change the transmission channel and
wireless radio ID. Set the same channel and ID for both the sender
unit and receiver unit.
When establishing multiple radio transmission wireless flash systems,
interference between flash systems may occur even if the flashes are set to
different channels. Set different wireless radio transmission IDs for each
channel (p.51).
50
Set to <'h>.
Press the <I> button of the <S>

cross keys.
Turn <9> to select <'

then press <8>.
Set to <'i>.
Operate and set the flash you want to

set as the receiver unit.
Select <'
i

as for the sender unit setting.
>,
h
> in the same way