Advertisement
V
ECTOR
Operation and Configuration
Documentation
This controller uses the latest generation X2 operating system. Detailed operation instructions for all devices equipped with
this operating system can be found on our website.
Also available are programming instructions for technicians and an application database.
Configuration
The device can be fully configured and commissioned using the EasySet program.
EasySet may be downloaded free of charge from our website www.vectorcontrols.com.
Documentation overview
Document Type
TCI2 Data Sheet
TCI2 Install Sheet
TCI2 Install Sheet TCP/IP
X2 Operations Manual button display
X2 Web Interface operation manual
X2 Engineering Manual
X2 Modbus Communication Module
(-MOD type)
X2 Modbus Communication Module
(-WEM, -ETM type)
X2 BACnet Communication Module
(-BAC type)
X2 BACnet/IP Communication Module
(-WEB, -ETB type)
X2 Wi-Fi / Ethernet Communication
Manual
(-WEM, -WEB, -ETM, -ETB type)
Note: The above list is not complete. The documents on the website are relevant.
Doc: 70-07-0703B, 20220426
Subjects to alteration
Document No.
Description
70-07-0174
Product data sheet (this document)
70-00-0688
Mounting and installation manual -OP, -MOD, -BAC
70-00-0893
Mounting and installation manual -WEM, -WEB, -ETM, -ETB
70-07-0950
Operations instructions of X2 system with button display
70-07-0952
Operations instructions of X2 Web interface
70-07-0737
Guidelines for configuring the X2 system
70-07-0290
Setup and configuration manual Modbus (no Modbus TCP)
70-07-0925
Setup and configuration manual Modbus TCP
70-07-0218
Setup and configuration manual BACnet (no BACnet/IP)
70-07-0899
Setup and configuration manual BACnet/IP
70-07-0900
Setup and configuration manual TCP/IP
© Vector Controls LLC, USA
www.vectorcontrols.com
TCI2
P
D
S
RODUCT
ATA
HEET
Page 7-10
Advertisement
