TCI-W11-U, TCI-W22-U Series Wall Mounted Universal Controller
Features
•
Universal PID and/or binary control for any analog input/output
signal and range.
•
Multiple auxiliary functions: heat-cool auto changeover,
automatic enable, setpoint compensation.
•
Differential, averaging, min and max functions
•
Cascading of control loops (-W22 type).
•
Alarm monitoring of low and high limits on all inputs.
•
Programmable reaction in case of alarm.
•
Feedback function for inputs and set points.
•
Functions for dehumidifying, set point shift, cascade control.
•
Password protected programmable user and control parameters.
•
Blue backlight
TCI-W22-U also includes
•
Power Cap protected real-time clock with 48hr power backup.
•
Clock with up to 8 switching events
•
7-day programmable schedules, with options including change of
setpoints and direct position of manual outputs.
Applications
•
Fan coil units
•
Heat exchangers
•
Zoning
General
•
TCI-W11-U: 1 independent control loop, 1 internal temperature sensor, 1 universal input (analog/binary/temp), 2
binary/PWM outputs, 1 analog output
•
TCI-W22-U: 2 independent control loops, 8 time schedules, 1 internal temperature sensor, 2 universal inputs,
2 binary/PWM outputs, 1 analog output
•
Internal temperature sensor standard. Add replaceable humidity element as required: AES3-HT-A2 (2%), AES3-HT-
A3 (3%), or AES3-HT-A5 (5%)
•
Flexible application configuration is made with a parameter-setting routine using the standard operation terminal.
Product Name
- W
T
C
I
2
2
Types and Ordering
Product
Product
Name
No.
TCI-W11-U
40-10 0265
TCI-W11-U-H
40-10 0266
TCI-W22-U
40-10 0269
TCI-W22-U-H
40-10 0270
AES3-HT-A2
40-50 0102
AES3-HT-A3
40-50 0103
AES3-HT-A5
40-50 0104
Temperature sensors: Use Vector Controls NTC sensors to achieve maximum accuracy:SDB-Tn10-20 (duct), SRA-Tn10
(room), SDB-Tn10-20 + AMI-S10 as immersion sensor.
Actuators: Choose modulating actuators with an input signal type of 0-10 V DC or 4-20 mA (Min. and max. signal limitations
may be set with parameters.3-pointpoint actuators with constant running time are recommended.
Binary auxiliary devices (e.g. pumps, fans, on/off valves, humidifiers, etc): Do not directly connect devices that exceed
specified limits in technical specifications – observe startup current on inductive loads.
Doc: 70-00-0140C, V2.0-20220523
Subject to alteration
•
VAV
•
Air handlers
•
Fan, Pump control
-
U
Housing
In/Outputs:
Control loops:
Mounting:
Series:
Temperature
Humidity
Loop
Sensor
Sensor
(internal)
(internal)
1
1
2
© Vector Controls LLC, USA
TCI-W11-U, TCI-W22-U Universal Controller
TCI-W11-U
•
Humidifiers
•
Dehumidifiers
•
Ventilation
Blank = square housing
See table below
1 = 1 control loop, 2 = 2 control loops
W = Wall mounted
TCI
Universal
Binary
Input
Output
0
1
1
2
0
2
1
1
1
1
O
VERVIEW
TCI-W22-U
•
Radiant heating
•
Radiant cooling
•
Pressurization
Time
Analog
Schedules
Option
Output
Standard
0
rH Sensor 3% acc.
1
Time schedules
8
rH Sensor 3% acc.
rH Sensor 2% acc.
rH Sensor 3% acc.
rH Sensor 5% acc.
Page 1-24