Operation And Configuration; Documentation Overview - Vector TRI2 Product Data Sheet

V
ECTOR

Operation and Configuration

Documentation

This controller uses the latest generation X2 operating system. Detailed operation instructions for all devices equipped
with this operating system can be found on our website.
Also available are programming instructions for technicians and an application database.
Configuration

The device can be fully configured and commissioned using the EasySet program or the built-in
operation terminal.
EasySet may be downloaded free of charge from our website www.vectorcontrols.com.
Configuring the TRI2 device
Configuring with EasySet (free PC application)

Use the PC and the EasySet tool to easily configure the TRI2 to your needs. Connect the PC with the
EasySet tool ether with the AEC-USB converter and the AEC-TRI-2 configuration adapter to the TRI2 or
use the Wi-Fi communication of the PC to connect to the TRI2 (for TRI2-WIM /-WIB devices only). See
TRI2 installation sheet for connection details.
Configuring with Operation Terminal

You can use the built-in operation terminal to configure the TRI2 to your needs. See "X2 Operations Manual touch display"
and "X2 Engineering Manual" for details.
Copy Configuration to other TRI2 devices
Complete parameter sets may be copied using the accessory AEC-PM2 or exchanged with a PC
using the EasySet tool and an RS485-USB converter or via Wi-Fi communication.
Copy configuration with the AEC-PM2

Use the configuration adaptor ACE-TRI-2 to load the configuration onto the AEC-PM2 plug-in
memory (see TRI2 installation sheet for connection details).
To copy the configuration to other TRI2 devices, connect the AEC-PM2 plug-in memory to the
TRI2 and simply press the copy button (see TRI2 installation sheet for connection details).
Copy configuration with EasySet (free PC application)

To copy the configuration to other TRI2 devices, connect the PC with the EasySet tool ether with the AEC-USB converter
and the AEC-TRI-2 configuration adapter to the TRI2 or use the Wi-Fi communication of the PC to connect to the TRI2 (for
TRI2-WIM /-WIB devices only). See TRI2 installation sheet for connection details.

Documentation overview

Document Type
TRI2-FU Data Sheet
TRI2-FU Install Sheet
X2 Operations Manual touch display
X2 Web Interface operation manual
X2 Engineering Manual
X2 Modbus Communication Module
(-MOD type)
X2 Modbus Communication Module
(-WEM type)
X2 BACnet Communication Module
(-BAC type)
X2 BACnet/IP Communication Module
(-WEB type)
X2 Wi-Fi / Ethernet Communication
Manual
(-WEM, -WEB type)
Note: The above list is not complete. The documents on the website are relevant.
Doc: 70-00-0750C, 20230220
Subjects to alteration
Document No. Description
70-00-0750 Product data sheet (this document)
70-00-0743 Mounting and installation manual
70-00-0951 Operations instructions of X2 system with touch display
70-00-0952 Operations instructions of X2 Web interface
70-00-0737 Guidelines for configuring the X2 system
70-00-0290 Setup and configuration manual Modbus (no Modbus TCP)
70-00-0925 Setup and configuration manual Modbus TCP
70-00-0218 Setup and configuration manual BACnet (no BACnet/IP)
70-00-0899 Setup and configuration manual BACnet/IP
70-00-0900 Setup and configuration manual TCP/IP
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
TRI2-FU
P D S
RODUCT ATA HEET
AEC-USB
AEC-PM2
AEC-TRI-2
Page 6-10