Adjustable Plinth Panel (Depending On The Model) - Miele PFD 400 Operating Instructions Manual

Adjustable plinth panel
(depending on the model)
Dishwashers with internal dispensing or act-
ive drying have an adjustable plinth panel.
Level the dishwasher.

Open the dishwasher door halfway and

loosen the two screws now visible at the
top of the plinth panel.
Pull the plinth panel upwards first and

then forwards.
Loosen the two screws on the right and

left of the plinth behind the panel.
Pull the inside of the plinth down to the

floor.
Tighten the two screws again.

Reassemble the plinth panel by following

the instructions above, but in reverse or-
der.
Removing the machine lid
If the dishwasher is fitted with a lid, it can be
removed as follows:
Remove both securing screws on the

back of the dishwasher with a screwdriver.
Open the door.

Unscrew the left and right fastening

screws with a screwdriver.
Lift the machine lid upwards to remove.

Installation
93