User tips
The displays for the system settings and for
system and fault messages are divided into
3 columns.
Water
Log book
Liquid
cleaning agent
Approx. wash cycles
left until reactivation.
Information
The left-hand column displays the title of
the currently selected menu with a picto-
gram or, in the case of system or fault mes-
sages, the pictograms for information or
faults .
The central column contains the menu op-
tions that can be selected and the system or
fault messages.
If required for the specific context, control
elements are displayed in the right-hand
column, such as the and arrow buttons
OK
or an
button.
Status window
Universal
Target temperature:
Actual temperature:
A symbol appears on the display while a
programme is running. If you tap this sym-
bol, a status window opens for 10 seconds,
which you can use to display various para-
meters and status messages about the pro-
gramme in progress.
20
System messages
The symbol denotes system messages.
These give information about current pro-
cesses and the status of the machine. Sys-
tem messages are displayed at the end of
the programme. If there is more than one
system message, they are shown one after
the other and must be acknowledged indi-
vidually by pressing
OK
Fault messages
In the event of a fault, a warning symbol
appears on the display and the Start/Stop
button flashes red in rapid succession. If
buzzer tones are activated, a warning tone
will also sound.
Acknowledge the fault by tapping on the
warning symbol. Then follow the instruc-
tions on the display and in the "Problem
solving guide".
65°C
57°C
Refill salt -appliance will
be disabled shortly.
Information
OK
OK
.