Soft Ap; Connecting Via Soft-Ap - Miele PFD 400 Operating Instructions Manual

Deactivate

Network/WiFi
Connection status
Deactivate
-
The WiFi connection is deactivated but
the connection options are retained. The
WiFi connection can be reactivated
without having to repeat the connection
process.
Connection status
-
Displays the IP address and the connec-
tion status of the WiFi connection.
New set up
-
Menu option for setting up a new WiFi
connection.
- Reset
Resets the WiFi connection. The connec-
tion options are lost and need to be set
up again.

Soft AP

If Connection via WPS is not possible, you

can connect the dishwasher to your local
network Via Soft AP.

A Soft-AP (Software-enabled Access Point)
is a wireless access point provided by your
dishwasher that can be used by other wire-
less machines in the vicinity.
With Soft-AP, the dishwasher is not connec-
ted to the Internet. A Soft AP is only used to
connect two machines locally via WiFi.

Connecting via Soft-AP

You can connect your dishwasher to your
WiFi network via a Soft-AP (Software En-
abled Access Point).
When asked

you want to use?

Information
Confirm the message by pressing OK and

follow the instructions in the external ap-
plication.
Waiting for connection will appear on the
display. This message remains active for
approx. 10 minutes after selection and is
then closed.
Once the connection has been estab-

lished,
will appear on the display.
Confirm the message with OK.

 Further settings
Which connection method do
Soft AP
, select
Follow the instructions
in the external
application.
Connection successfully established
.
OK
71