Technical support
Move to the
S1 RELAY SETUP
INSTALLATION
750 OPERATION
setpoint message. To
put the relay in the Ready state, press the value keys until the READY message is displayed
and press the ENTER key. Enter "Yes" at the ARE YOU SURE? prompt. The Relay In Service
LED Indicator will now turn on and the SELF TEST WARNING: Relay Not Ready diagnostic
message will disappear.
TECHNICAL SUPPORT
GE Multilin contact information and call center for product support is shown below:
GE Multilin
215 Anderson Avenue
Markham, Ontario
Canada L6E 1B3
Telephone: 905-294-6222 or 1-800-547-8629 (North America), +34 94 485 88 00 (Europe)
Fax: 905-201-2098 (North America), +34 94 485 88 45 (Europe)
E-mail: multilin.tech@ge.com
Home Page:
http://www.GEmultilin.com
54
750/760 Quick Reference Guide