Installing The Sas Riser Card And Controller Assembly - Lenovo ThinkServer RD220 3797 Series Installation And User Manual

v Tape-enabled server model:

Installing the SAS riser card and controller assembly

To install the SAS riser-card and controller assembly in the server, complete the
steps for the applicable server model.
v 12-drive-capable server model:
78
ThinkServer RD220 Types 3729, 3779, 3797, and 3798: Installation and User Guide
1. Press down on the assembly release latch 2 and lift up on the tab to
release the SAS controller assembly, which includes the SAS riser card 1 ,
from the system board.
2. Lift the front and back edges of the assembly to remove the assembly from
the server.
1
SAS controller front retention bracket
2
SAS riser card
3
SAS controller
4
Alignment post
1. Place the front end of the SAS controller in the front retention bracket and
align the SAS riser card with the SAS riser-card connector on the system
board.