Rear View - Lenovo ThinkServer RD220 3797 Series Installation And User Manual

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
Ethernet connectors: Use any of these connectors to connect the server to a
network.
Power-cord connector: Connect the power cord to this connector.
USB connectors: Connect a USB device, such as USB mouse, keyboard, or other
USB device, to any of these connectors.
Serial connector: Connect a 9-pin serial device to this connector. The serial port is
shared with the Integrated Management Module (IMM). The IMM can take control of
the shared serial port to perform text console redirection and to redirect serial
traffic, using Serial over LAN (SOL).
Video connector: Connect a monitor to this connector. The video connectors on
the front and rear of the server can be used simultaneously.
Note: The maximum video resolution is 1280 x 1024 at 75 Hz.
Systems-management Ethernet connector: Use this connector to connect the
server to a network for systems-management information control. This connector is
used only by the IMM.
22
ThinkServer RD220 Types 3729, 3779, 3797, and 3798: Installation and User Guide
1
Ethernet 3 (optional) connector
2
Ethernet 4 (optional) connector
3
Power supply 1 connector
4
Power supply 2 connector
5
Power cord connectors
6
USB 4 connector
7
USB 3 connector
8
Serial connector
9
Video connector
10
Ethernet 2 connector
11
Ethernet 1 connector
12
Systems-management (Ethernet)