Factory Setting; Send The Configuration To The Device - Bticino Small Entrance Panel Compact User And Installation Manual

Factory setting

This section offers some functions for managing the device:
– Forwarding of the configuration to the device (address book and other customisations)
– Reset of the factory data
– Firmware update
– Modification of parameters
A
B
C
D
1
2
A

Send the configuration to the device

B Display the System status
C Reset the factory data
D Update the firmware (not to be used, reserved for developers)
1. Select the call duration time
2. Click to send
Send the configuration to the device
This function is to be used in the event that sending the configuration completed using the SD
software (Notify the device to update the Address book) was unsuccessful.
1. Select the SD network address
2. Enter the installer code
3. Click to send
4. Click to confirm
Small Entrance Panel Compact
1
3
2
Do you want to install it with this?
4
27
User and installation manual