[S1] Gmsl Switch Summary & Locations; [J3] External Power Connector - Connect Tech NVIDIA Jetson GMSL Camera Platform User Manual

[S1] GMSL Switch Summary & Locations
This must be set correctly at power up! This signal is sampled once at boot up and cannot be
changed on-the-fly. The GMSL mode cannot be changed in software. The setting applies to all
8 channels, so you cannot mix GMSL1 and GMSL2 cameras on the same board.
A B
0 0 GMSL1 High Immunity mode on
0 1 GMSL2 6Gbps
1 0 GMSL2 3Gbps
1 1 GMSL1 High Immunity mode off

[J3] External Power Connector

Pin
1 (Bottom) GND
2 (Top) +12V IN
Document: CTIM-00077
Revision: 0.05
NVIDIA Jetson® GMSL Camera Platform
Mode
Connector Description
Page 12 of 17
Users Guide
www.connecttech.com
Date: 2022-10-28