The information contained within this user’s guide, including but not limited to any product specification, is subject to change without notice. Connect Tech assumes no liability for any damages incurred directly or indirectly from any technical or typographical errors or omissions contained herein or for discrepancies between the product and the user’s guide.
You may obtain warranty service by delivering this product to an authorized Connect Tech Inc. business partner or to Connect Tech Inc. along with proof of purchase. Product returned to Connect Tech Inc. must be pre-authorized by Connect Tech Inc. with an RMA (Return Material Authorization) number marked on the outside of the package and sent prepaid, insured, and packaged for safe shipment.
ESD Warning Electronic components and circuits are sensitive to Electrostatic Discharge (ESD). When handling any circuit board assemblies including Connect Tech carrier assemblies, it is recommended that ESD safety precautions be observed. ESD safe best practices include, but are not limited to: •...
Introduction Connect Tech’s Xtreme/10G XDG205 provides high density, high port count Layer 2 switching and Layer 3 routing with 10G uplinks. A total of 36 switchable ports, in an extremely small form factor 85mm x 85mm. The devices target managed Layer 2 and Layer 3 equipment in SMB, SME, and industrial applications where high port count 2.5G switching with 10G aggregation/uplinks are required.
• CLI via UART • Software API • SMNP Operating Temperature 40°C to +85°C (-40°F to +185°F) Warranty and Support Limited One-Year Warranty and Free Technical Support Document: CTIM-00090 Page 8 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
XBG301 revision ECN status. This warning also applies to end users that have their own custom breakout boards that were built based on the XBG301 REV C or older. Document: CTIM-00090 Page 9 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Engineering test access. Not used during normal operation. Switch Summary & Locations Designator Function Description/Note Configuration Switch Used to Put Switch in to Manual Reset Mode. Document: CTIM-00090 Page 12 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Location XDG205 Module Primary Part Connector Manufacturer: TE Connectivity Part Number: 3-1827231-6 Carrier Board Primary Part Mating Connector Manufacturer: TE Connectivity Part Number: 3-5353652-6 Document: CTIM-00090 Page 13 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Users Guide www.connecttech.com Board-to-Board Reference Design Package Connect Tech Product a complete reference design package for the XBG301 breakout board. This details how to properly interface to the XDG205 Switch. This package contains the following for the XBG301 Breakout Board:...
If this LED is ON, this indicates that all on-board power supplies are ON and at the proper level. Status System Status Indicator Function TBD Document: CTIM-00090 Page 16 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
United States of America, other countries and international treaties. Microsemi retains all ownership, copyright, trade secret and proprietary rights in the documentation. Document: CTIM-00090 Page 17 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Login Screen of Web Management Interface To login into the web management interface, the default login is admin and the password is blank. (See below) Document: CTIM-00090 Page 18 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
United States of America, other countries and international treaties. Microsemi retains all ownership, copyright, trade secret and proprietary rights in the documentation. Document: CTIM-00090 Page 19 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
1.55 18.6 1x 2.5G Link Up 1.60 19.2 24 x 2.5G Links Up 2.76 33.12 24 x 2.5G, 8 x 10G SFP+ Up 50.4 Document: CTIM-00090 Page 23 of 26 Date: 2023/04/12 Revision: 0.00 Connect Tech Inc. 800-426-8979 | 519-836-1291...
Need help?
Do you have a question about the Xtreme/10G XDG205 and is the answer not in the manual?
Questions and answers