Dimm Installation; Dimm Removal - Supermicro X12SPW-TF User Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
page 33.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
UID-SW
UID-LED
VGA
MH2
BMC
AST2600
BT1
BIOS
LICENSE
I-SATA0~3
MH3
MH9
MH6
JL1
Release Tabs
Press both notches
straight down into
the memory slot.
35
Chapter 2: Installation
COM1
MH1
USB4/5 (3.0)
LAN2 LAN1 IPMI_LAN
USB0/1
LEDBMC
LE4
MH15 MH16
JBT1
CMOS CLEAR
I-SATA4~7
PCH
621A
JRK1
X12SPW-TF/F
REV: 2.00
DESIGNED IN USA
LE3
CPU
MH4
1
MH5
FAN2
FAN1
Notches