Salicru EQUINOX2 3001-S User Manual page 67

Avenida de la Sierra 100, 08640 - Benasque
If the photovoltaic installation is made up of
10 panels of 440 W each, the power of the solar
field will be 440 x 10 = 4,400 Wp = 4.4 kWp.
You have to enter the price per kWh consumed
from the grid. For example, the retailer in this
example charges a price of
The price at which the retailer compensates
for the kWh discharged into the grid must be
entered. For example, the retailer in this example
compensates it at a price of
Fig. 40. Creating the plant.
Once all the values have been entered, press the "Create plant"
button.
Next, the app will indicate that the plant has been successfully
created by means of a message at the bottom and a new header
will appear in the "My plants" panel:
7.4.3. "12h" Monitoring (Day).
This monitoring mode only works during the hours of solar
irradiance in which the inverter is running.
While the inverter is off, the app will not receive generation or
consumption data.
To monitor consumption data, the CT transformer must be installed
and connected as indicated in section 5.5.1 and the inverter must
have the following parameters configured:
General Settings → Power Limit → make sure it is set to "ON"
•
option.
This parameter activates the reading of the transformer CT.
Without this parameter activated, even if the CT is connected,
the inverter will not read its signals.
General configuration → Export → Change from 100% to 0%,
•
so as not to spill the surplus to the network.
USER MANUAL
Chalet Pirineos
Residencial
GMT +01:00 Amsterdam, Berlin
Euros (€)
0.14721 €/kWh.
0.0537 €/kWh.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
67