Address Space - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

4.1.3

Address space

The DQ 8x24VDC/0.5A M12-L 8xM12 I/O device can be configured differently; see following
table. Depending on the configuration, additional/different addresses are assigned in the
process images.
Configuration options of the DQ 8x24VDC/0.5A M12-L 8xM12 I/O device
You can configure the I/O device Digital Outputs as follows:
• With STEP 7 (TIA Portal)
• With GSD file in any configuration software
When you configure the I/O device by means of the GSD file, the configurations are available
under different short designations/device names in the device view of your configuration
software.
The following configurations are possible:
Table 4-2 Configuration options
Configuration
1 x 8-channel DQ 8x24VDC
1 x 8-channel DQ 8x24VDC QI
1 x 8-channel DQ 8x24VDC MSO
2 x 4-channel DQ 8x24VDC S
Address space for configuration as 1 x 8-channel DQ 8x24VDC
The following figure shows the address space allocation for the configuration as 8-channel
I/O device digital outputs without value status. The start address for the I/O device can be
assigned freely. The addresses of the channels are derived from the start address.
Figure 4-1 Address space for configuration as 1 x 8-channel DQ 8x24VDC without value status
I/O device digital outputs DQ 8x24VDC/0.5A M12-L 8xM12 (6ES7142-6BG00-0BB0)
Equipment Manual, 03/2023, A5E46570894-AD
Short designation/ Configuration software, e.g., with STEP 7 (TIA Portal)
device name in the
Integrated in hardware
GSD file (device view
in the configuration
software)
DQ 8x24VDC
DQ 8x24VDC QI
DQ 8x24VDC MSO
DQ 8x24VDC S
4.1 Parameters/address space
catalog STEP 7
(TIA Portal)
V16 or higher with HSP
0299
V16 or higher with HSP
0299
V16 or higher with HSP
0299
V16 or higher with HSP
0299
PROFINET IO
GSD file in
STEP 7 (TIA Portal) V11 or
higher or STEP 7 V5.5 SP4
HF1 or higher
X
X
X
X
25