Table of Contents
Advertisement
Network Setting (IPv6)
These settings are required for connecting the
machine to an Internet protocol Ver.6 network
environment.
[Printer Name]
Enter the printer name using 16 characters or less.
(Factory setting: [RISO PRINTER])
[LAN0], [LAN1]
Configure the network information for the two
networks connected to the LAN0 terminal and
LAN1 terminal on the rear of the machine.
^
^
•
[LAN1] cannot be selected when using the
print controller.
[Address Setting Method]
Select from [Manual], [Stateless Address], and
[Stateful Address].
If you select [Manual], enter values in [IP Address],
[Prefix Length], and [Gateway Address].
(Factory setting: [Manual])
[IP Address], [Prefix Length], [Gateway
Address]
Set these items if you selected [Manual] for
[Address Setting Method].
^
^
•
When assigning the IP addresses manually,
assign a different IP address to LAN0 and
LAN1.
Administrator Menu Setting Items
Network Setting (Details)
Configure the details of the network environment.
The setting items vary depending on your network
environment.
[LAN0], [LAN1]
Configure the detailed network information for the
two networks connected to the LAN0 terminal and
LAN1 terminal on the rear of the machine.
^
^
•
[LAN1] cannot be selected when using the
print controller.
[Proxy]
Set this to use the proxy server.
[DNS (IPv4)], [DNS (IPv6)]
Convert the domain name to an IP address using
the DNS server.
Set this according to your Internet protocol version.
[WINS]
Convert the PC name into an IP address using the
WINS server.
[Others]
This function is unavailable.
1
Select [System] - [Network Setting
(Details)] on the [Admin Menu]
screen.
The [Network Setting (Details)] screen is displayed.
2
Select [LAN0] or [LAN1].
VALEZUS T1200 Administrator's Guide
3
23
Advertisement
Table of Contents
