Table of Contents
Advertisement
Beep Sound
Configure whether to sound a confirmation beep when a button or key is
pressed, or a beep when an error occurs.
•
[OFF]
Both the confirmation and error sounds will not work.
•
[Limited]
Only the error sound will work.
•
[ON]
Both the confirmation and error sounds will work.
Metric/Inch Switch
Specify the unit of measure for length used with this machine. The paper
size display changes according to the unit selected.
Auto Reset Setting
This function automatically resets the machine to the default values
when the machine is not operated for a certain period of time.
Power Saving Setting
Switch the machine to power saving mode when the machine has not
been operated for a fixed period.
There are two power saving options: [Auto Backlight-OFF] and [Auto
Sleep].
You can select sleep from two different levels of power consumption:
[Low] or [Standard].
•
[Auto Backlight-OFF]
The touch panel will turn off if the machine is not operated for a certain
length of time. Press the [Wake Up] key on the operation panel to
return to normal operating status.
You can configure the time until the touch panel turns off.
•
[Auto Sleep]
The machine will enter the sleep mode if the machine is not operated
for a certain length of time. Press the [Wake Up] key to resume
operations.
You can configure the time until the machine enters the sleep mode.
^
^
•
If you set [Power Consumption (in Sleep)] to [Low], you
can save more power than you can with [Standard].
However, the machine will not automatically recover from
the sleep mode when printing is instructed from a
computer in a network segment that is different from this
machine.
Auto Power-OFF Setting
This function automatically turns off the power for operations when the
machine is not operated for a certain period of time.
Power Schedule
Use this function to automatically turn on and off the power to this
machine at a specified time. You can register up to 10 sets of
combinations of start or end time and day of the week according to your
usage environment. It prevents you from forgetting to turn off the
machine, which helps you save power.
Network Setting (IPv4)
Use this function when using this machine over a network connection.
This is a setting for connecting to an Internet protocol Ver.4 network.
12
Setting / Description
Set value / Details
[OFF], [Limited], [ON]
[mm], [inch]
•
[OFF], [ON]
•
Auto reset time setting: 1 min. - 60
min.
(Factory setting: 3 min.)
•
[Power Consumption (in Sleep)]
[Low], [Standard]
[Auto Sleep]
Auto sleep time: 1 min. - 60 min.
(Factory setting: 40 min.)
•
[Auto Backlight-OFF]
[OFF], [ON]
Auto backlight-OFF time: 1 min. - 60
min.
(Factory setting: 10 min.)
•
[OFF], [ON]
•
Auto power-OFF time setting:
1 min. - 120 min.
(Factory setting: 90 min.)
See p.20
See p.22
VALEZUS T1200 Administrator's Guide
Advertisement
Table of Contents
