Table of Contents
Advertisement
Setting / Description
Output Tray Priority (when using the double tray stacker)
Specify the priority for the stacking trays when outputting paper.
•
When the output tray is specified on the print settings of the print
^
^
controller, printouts are output to the specified tray.
High Capacity Feeder/Double Tray Feeder
[High Capacity Feeder] or [Double Tray Feeder] is displayed on the
administrator menu depending on the connected standard tray.
Configure to which position the standard tray is lowered when the
machine runs out of paper or when the standard tray descent button is
pressed.
High Capacity Stacker/Double Tray Stacker
[High Capacity Stacker] or [Double Tray Stacker] is displayed on the
administrator menu depending on the connected stacking tray.
Configure to which position the stacking tray is lowered when the
machine finishes or pauses the job.
When using the double tray stacker, you can touch [Unit 1] to configure
the left stacker settings and touch [Unit 2] to configure the right stacker
settings.
•
When set to [Do not lower], the stacking tray will not be lowered at
^
^
the end of the job. This setting is suitable when you output many
jobs of single pages (variable printing) or a small number of
printouts. When you output a small number of printouts, the time
for waiting until the stacking tray returns to the printing position can
be shorted.
•
When set to [Lower to the carriage], regardless of the number of
printouts, the stacking tray will be lowered to the carriage at the
end of the job. This will eliminate the need to press the button for
lowering the stacking tray when pulling out the entire carriage for a
large number of printouts. However, it will not be possible to print
the next job until the printouts are removed and the stacking tray
has returned to the printing position.
•
When set to [Lower to the specified position], the stacking tray will
be lowered to the specified position at the end of the job. Use this
setting to configure a position at which you can easily remove the
printouts when not using the carriage.
•
When an equivalent of 3,200 to 4,000 sheets has been output to
the stacking tray, the stacking tray will be lowered to the carriage
regardless of the setting of [High Capacity Stacker] or [Double Tray
Stacker].
Non RISO Ink Setting
Specify whether to prohibit or permit the use of Non-RISO ink by color.
Paper tray setting display
Specify whether to allow users without administrator authority to change
paper tray settings.
If this is set to [OFF], the [Paper Tray Setting] button is disabled both on
the [System Info] screen and the [Paper Selection] screen.
Administrator Menu Setting Items
Set value / Details
[Unit 1], [Unit 2]
•
For [High Capacity Feeder], see
p.25.
•
For [Double Tray Feeder], see p.25.
[Do not lower], [Lower to the carriage],
[Lower to the specified position]
Input value: 150 mm - 400 mm (6" -
15")
(Factory setting: 150 mm (6"))
See p.22
[OFF], [ON]
VALEZUS T1200 Administrator's Guide
3
15
Advertisement
Table of Contents
